Monday, February 24, 2014

Make My 5 3 Faster

Vortec 5.3 engine power can be increased several times over with proper parts selection.


The best thing about Chevrolet's 5.3-liter Vortec engines is the adaptability of the block to accept performance parts. These engines, present in Chevrolet's line of pickup trucks and SUVs, can be built into LS-series engines with the addition of a few off-the shelf GM parts, or they can be built into powerful engines in their own right with aftermarket parts. There's no end to the variations that exist in making the 5.3-liter Vortec faster, more powerful and more efficient. The gains are only limited by your imagination and your wallet.


Instructions


Low-Cost Aftermarket Performance Parts


1. Install the basics to begin transforming the 5.3-liter Vortec engine. A high-flow cold air intake is the most basic modification necessary to increase the speed of these engines.


2. Install a high-flow cat-back exhaust system. This device bolts into place with common hand tools such as a socket set and can be installed in as little as an afternoon.


3. Install a reprogrammed computer. The computer automatically adjusts for variances in the air/fuel ratio, always bringing the ratio back to the ideal specified by the factory. A reprogrammed computer idealizes the air/fuel ratio to account for higher-octane gas, more air into the combustion chamber and faster exhaust scavenging. A reprogrammed computer is vital to build horsepower in computer-controlled engines.


Mid-Priced Aftermarket Performance Parts


4. Install a set of ceramic-coated headers to further improve exhaust efficiency. Headers from the factory are always built to conform to two parameters: efficiency of exhaust removal from the engine and low cost to construct. Aftermarket companies have the luxury of working without cost constraints, and so they can be far more lavish in the design of their headers.


5. Replace the intake manifold with an LS1 unit. The LS1 engine intakes were built primarily for the Camaro, Corvette, and Firebird, but have since been retrofitted to the 5.3L Vortec engine. These intakes require changes to the air intake, but can increase horsepower dramatically when used in conjunction with Chevrolet's Vortec cylinder heads. Use GM performance products parts for the best fit and finish.


6. Upgrade the valve train of the 5.3L Vortec with stiffer springs, roller-type rocker arms, and lightweight push rods. If you are unfamiliar with this process, it is employ the services of an engine specialist, because this procedure requires the removal of sensitive engine parts and should not be undertaken by inexperienced shade tree mechanics.


High-Cost Engine Modifications


7. Install a forced-air induction system. Forced induction systems generally produce the greatest horsepower gain for the money spent, but typically may return relatively little in vehicle resale value. A typical supercharger installation can cost as much as $5,000 or more, depending on how much engine work is required.


8. Install a nitrous oxide or methanol injection system. For advanced racers and custom builders, nitrous oxide added to any 5.3L Vortec engine produces prodigious power gains. Forced-induction systems benefit greatly from the additional cooling provided by methanol injection, as well.


9. Rebuild the engine with increased compression and displacement. Full engine work typically involves stripping the engine of all its primary parts, such as the pistons and crankshaft, camshaft, and cylinder heads. The heads are ported for greater combustion chamber efficiency, and lighter, more efficient parts are added to reduce stress on the engine. A crankshaft adjustment can increase an engine's displacement while machining the cylinder heads increases the pressure at which the engine fires, producing a more powerful spark. This set of engine improvements should never be undertaken by a novice, and can easily eclipse the price paid for the entire vehicle and all the modifications done thus far. It is also the single best way to build power in V8 engines, in particular the Chevrolet Vortec 5.3L.


Tips Warnings


Always farm out projects you are uncomfortable with performing yourself, particularly projects which involve internal engine parts.


Engine upgrades can easily backfire. Adding too much air to the air/fuel mixture, for instance, will increase detonation, and the vehicle will not run correctly.








Related Posts:




  • Make A Blackhead Gun

    Blemishes make everyone self-conscious, and thinking about one in a prominent position can really ruin your day. If you'd rather not spend the money on a blackhead remover gun, you can make one fo...


  • Make A High School Diploma For Free

    Make a high school diploma for free. Bypass worries about diplomas arriving in time for the graduation ceremony. Forget the hassles that come with ordering diplomas from a printer. Avoid spending...


  • Make A Recessed Medicine Cabinet From A Picture Frame

    If you really want to be innovative, install a hidden medicine cabinet. Pick out a picture frame that fits the bathroom decor, and use that as your medicine cabinet door. Because the cabinet is bu...


  • Make Fireproof Mortar

    Fireproof mortar adds additional fire and heat protection to a wall or building.Most mortar is fireproof to some extent. The materials of clay, cement, lime and sand are naturally resistant to fir...


  • Make A Free Printable Lease Agreement

    Protect your property and investment with a lease agreement.If you're a property owner who has rentals, it is in your best interest to get new tenants to sign a lease agreement prior to moving in....