Wednesday, February 26, 2014

flue-for-an-oil-furnace

Flue for an oil furnace


My oil furnace vents through a masonry chimney. The bricks are spalling and the sweep says the clay liner has cracks. I am going to tear down to the roof line and rebuild the brick. I am planning on putting a flexible steel liner from the furnace, through the entire length of the chimney. Do I need to have a clay liner in the section I am replacing? Even though its an oil furnace, I am thinking I will insulating the section of the steel liner above the last section of clay I am removing because we have cold winters here in northern NY. Will that be enough or do I need a clay flue also? Will the liner and insulation fit in side the clay flue? Clay is cheaper than that liner insulation, If I do the clay, do I need to insulate the liner? Thanks. Welcome to the forums! It may be a bit before our chimney pros chime in, but here's a comment. Not sure why you want to insulate the chimney all the way up. A proper cap will provide a stopping point for cold air. I would not think you need another clay liner if you are using an approved steel liner for the full length. Hang in there, as more comments, probably better than mine, are coming. Thanks Chandler. I thought insulating the liner would help prevent condensation. If it were just the steel liner and the brick, it could get pretty cold. Its not uncommon for us to get many nights of -20F and a few nights of -30F to -40F. I did some searching and found an answer from Chimney Liner Depot .com's FAQ: Q. What if my chimney doesn’t have an old clay lining? As long as you have a masonry chimney you can install a Flex King Chimney Liner. There doesn’t have to be an old clay lining in the chimney. If there isn’t a clay lining in the chimney then you definitely need to install a stainless steel liner. Still would like to know if clay tile would provide any/enough insulation so that I don't need to insulate the liner. The clay liner offers no insulative effect but it may, depending somewhat on how the chimney is constructed, add thermal mass once it is heated.








Related Posts:




  • Gas furnace chimney need a cap combined posts

    gas furnace chimney need a cap? (Combined Posts)Mine doesn't have one. My other chimney (for the wood fireplace) does have one though. Thanks, Charlie I realize the new furnace can be vented simpl...


  • Gas furnace chimney cap

    Gas Furnace Chimney CapI live in Central New Jersey and need a new chimney cap for my gas furnace. I've been lead to believe that there are safety considerations perculiar to choosing a chimney ca...


  • Janitrol furnace cycling problem

    Janitrol furnace cycling problemHello, Okay, here is my problem. This furnace is about ten years old, sorry I don't have the model number here with me. My brother just recented purchased a house a...


  • Help with a jensen fwood furnace

    Help with a Jensen Fwood furnaceHi all, new here and in need of some direction We have a Jensen wood/coal furnace installed in our home by the previous owner. We didn't have a manual for it's oper...


  • Interthermnordyne gas furnace not working

    Intertherm(Nordyne) gas furnace not working :(and I've googled and googled and am at the end of my rope. Help please. Here's the story so far: I think it is a mid efficiency one. Per diagnostic co...