Where are weep holes placed in strobes?

It's interesting:
"Learn connect what's happing in the news to the theme of weddings or marriage, the stereotypical characteristics of a groom, the duties of a best man, ..."

Strobe lights are most commonly found in dance clubs, enhancing an establishment's ambiance. However, strobe lights also provide a unique light show for other occasions, such as Halloween or Christmas. In fact, homeowners often string strobe lights in trees or even inside the home for creating an exciting party atmosphere. However, strobe lights require preparation, such as weep hole installation, for retaining a long working lifespan.

1. Strobe Light Features

   • A strobe light bulb typically has a small C9 threaded end for attachment to a stringed socket set. The bulb's internal structure consists of a circuit board within a plastic base. A clear cover housing multiple facets creates a sparkle effect for the emitted light. Common strobes are full of xenon gas, which reacts with applied electricity to generate rapid light flashes, creating the strobe effect.

   Weep Hole Placement

   • Strobe lights are prone to condensation within their assemblies. The xenon gas and electrical reaction generates heat, causing surrounding water vapor within the air to condense inside the bulb assembly. As a result, the bulb may be damaged from moisture. Weep holes allow the condensation to escape from the assembly. Weep holes are typically installed by the user, depending on the intended position of the lens, either hanging down or facing upward. Lenses that hang downward need to have two weep holes installed on opposite sides of the lens assembly. Lenses facing in an upward position need two weep holes installed on opposite sides of the plastic base.

   Hole Installation

   • Holes are easily installed with a soldering iron. Heat the soldering iron and place the tip against the lens or base, depending on the orientation of the lens. Melt the surface until the solder tip just enters the bulb's interior. Make sure to pull the iron's tip away from the surface before the hole becomes larger than 1/8th of an inch in diameter. In addition, verify the circuit board's position so the iron doesn't damage the intricate circuitry.

   Universal Weep Holes

   • Users often alter strobe string orientations for different occasions. For more versatile use, universal weep holes may be installed. Create four holes instead of only two: The four holes should reside in the same location as the two-hole installation, with two holes in the base and two holes in the lens.

Source: www.ehow.com

Tags: holes installed, weep holes, weep holes installed, circuit board, facing upward